Basic Operation
Lexicon
FRONT PANEL OVERVIEW
1
1. Standby Button
Activates and deactivates standby mode when the LX amplifier is powered on with the rear panel power switch. The standby button performs no function when the LX amplifier is powered off with the rear panel power switch.
When the unit is on, pressing the standby button activates standby mode and deactivates the LX amplifier. When the unit is in standby, pressing the standby button deactivates standby mode and activates the LX amplifier. The red standby button LED will flash for approximately five seconds. Then, the blue channel status LEDs will light. If the red standby button LED
2
flashes rapidly and the blue channel status LEDs do not light, the incoming AC voltage is too low or the temperature of the transformer is too high. Refer to Section 3 for troubleshooting information.
Note:
•Power is still supplied to the LX amplifier when standby mode is activated.
