Diagnostic Aids 3-3
4098-001
End of Forms (EOF) Test
ToStart the Test:
•Unplug power to the printer.
•Remove the rear cover.
•Placea2pinjumperonJ13.
•Hold down the Powerand Paper Feed buttons.
•Plug power to the printer.
•Release the buttons when the PowerLight flashes
(approximately 5 seconds).
To Tes t:
•Place a piece of paper in the manual feeder to activate the end-
of-forms sensor.
•The Busy Light will come on when the flag is removed from the
sensor and will be off when the flag is in the sensor.
•Unplug the printer power or press the Powerbutton to end
the test.
•Remove the jumper from J13.