Diagnostic Aids 3-5
4098-001
Clear NVRAM
ToRun:
•Unplug power to the printer.
•Remove the rear cover.
•Placea2pinjumperonJ14
•Place a sheet of paper in the manual sheet feeder farenough to
activate the paper sensor.
•Open the access cover.
•Hold down the Powerand Paper Feed buttons.
•Plug power to the printer.
•Release the buttons when both the Powerand Busy Lights turn
on.
•After approximately 20 seconds, the PowerLight will flash.
•Power off the printer to exitthe t est.
•Remove the jumper from J14.
What Happens:
•The following will be reset to zero:
– Last Error
– Page Count
– Carrier Metric
– Drop Count (Color and Black)