Lexmark™ W820
Quick Reference
Loading the trays
1Open the tray.
2Slide the guides out of the way. Pull up on the right guide, and press the lever on the back guide. (Trays 4 and 5 only have a back guide.)
3Place the print media against the front left corner of the tray. Labels on the tray indicate paper size and orientation.
Note: Do not overload the trays. This can cause print media jams. The label on the back guide indicates the maximum stack height.
4Adjust the back and side guides so they lightly touch the sides of the stack.
Loading the multipurpose feeder
Use the multipurpose feeder to print on special media that is not already loaded in the trays.
The multipurpose feeder accepts plain paper, envelopes, transparencies, card stock, and labels.
1In your word processor, spreadsheet, browser, or other application, select File ➤ Print.
2Click Properties (or Options, Printer, or Setup depending on the application) to view the printer driver settings.
3Select MP Feeder from the Form Source list box.
4Specify the size and type of your print media.
5Click OK, and then send your print job as usual.
6Go to the printer. A display message prompts you to load print media.
7Open the multipurpose feeder.
8Slide the side guide to the back.
9Pull out the extension guide so it supports the entire length of the print media.
Note: Do not overload the multipurpose feeder. This can cause print media jams. The label on the guide indicates the maximum stack height.
10Place the print media along the front side of the multipurpose feeder. Labels indicate paper size and orientation.
Multipurpose feeder
11Push the print media gently into the printer.
12Adjust the side guide so it lightly touches the side of the stack.
13Press Go.
Printing on special media
Envelopes
Your printer may have a multipurpose feeder, or it may have an envelope feeder. Use either one for envelopes.
To load the envelope feeder:
1Slide the guide out of the way.
2Lift the envelope weight and hold it.
Envelope weight
Guide
3Place the envelopes along the right side of the envelope feeder.
Load envelopes face down, with the flap up. Labels indicate envelope size, orientation, and maximum stack height.
4Lower the envelope weight.
5Adjust the guide so it lightly touches the side of the stack.
Transparencies
You can use the multipurpose feeder or Tray 1 for transparencies. Load transparencies just as you would any other print media.
Canceling a print job
To cancel a print job after it has started printing:
1Press Menu until you see Job Menu, and then press Select.
2Press Menu until you see Cancel Job, and then press Select.
© Copyright 2001Lexmark International, Inc. All rights reserved.
Printed in U.S.A.
This document is printed on recycled paper. 3/01
E.C. 5B0000 | P/N 12B0025 |
