Lexmark 910 Series manual Unpack your printer, Series??, Prepare the printer, Load paper, 11X1111

Please save this sheet for future reference. *11X1111*

1 Unpack your printer

Note: Contents may vary.

~~~~~~~~~~~~~~~~~~~~~~

~~~~~~~~~~~~~~~~~~~~~

~~~~~~~~~~~~~~~~~~~~~

~~~~~~~~~~~~~~~

?

910 Series??

http://support.lexmark.com/

Safety information

•Use only the power supply provided with this product or the manufacturer's authorized replacement power supply.

•Connect the power supply cord to an electrical outlet that is near the product and easily accessible.

•Refer service or repairs, other than those described in the user documentation, to a professional service person.

CAUTION: Do not set up this product or make any electrical or cabling connections, such as the power supply or telephone, during a lightning storm.

2 Prepare the printer

	Connect the power	2	Make sure the Power
1	cord.		light is on.

2

1

3	Press + to scroll to
	your language, and

then press .

2

1

3 Load paper

	Lift the paper		Load the paper.
1		2
	support and extend
	the paper exit tray.

Lower the paper feed guard,

3 squeeze the paper guide, and slide

it to the left edge of the paper.

3

2

1

4 Install the print cartridges

Open the

1 access cover.

Remove the photo

2 cartridge from the print cartridge storage unit.

Reminder: Save the print cartridge storage unit to protect new or partially used cartridges.

3	Remove the sticker and tape from
	the bottom of the print cartridges.
	1	1
	2	2

Warning: Do not touch the copper contact area on the back or the metal print cartridge nozzles on the bottom.

4	Open the cartridge lids, insert the cartridges,
	and snap the cartridge lids closed.

1 2 3

5	Close the
	access cover.

6 Press to print

an alignment page.

You may discard the alignment page after it prints.

If you are using your printer with a computer, continue with “Install the software”...

www.lexmark.com