Fujitsu R630, V810 manual Installing an accessible drive, System expansions

System expansions

Installing an accessible drive

►Open the casing (see "Opening the casing" chapter).

►Remove the front (see "Removing the front panel" chapter).

► Pull the empty slide-in module out of the casing.

	1
	2	1
1	2
	1

►Loosen the screws (1).

►Remove the rails from the cover (2).

Do not throw away the cover of the empty slide-in module. For cooling, protection against

i fire, and in order to comply with EMC regulations, you must refit the empty slide-in module if you remove the drive again later.

► Take the new drive out of its packaging.

► Adjust the required settings on the drive (if necessary, on already-installed drives as well).

A26361-K680-Z122-1-7619, Edition 1 39