System expansions
Removing board with screw
►Open the casing (see "Opening the casing" chapter).
►Disconnect the cables connected to the board.
1 |
2 |
►Loosen the screw (1).
►Remove the board from the casing (2).
! | For cooling, protection against fire, and in order to comply with EMC (electromagnetic | |
compatibility) regulations, you must refit the cover plate. | ||
|
1 |
2 |
►Push the rear slot cover plate into the slot (1). Ensure that the point of the cover engages on the outside of the casing.
►Fasten the rear slot cover plate with the screw (2).
32 |
