Fujitsu R630 Installing and removing drives, Removing the front panel, IDE drives, SCSI drives

System expansions

Installing and removing drives

The PC casing can accommodate a total of eight drives:

●four accessible drives

(three 5¼" drives and one 3½" drive)

●four non-accessible drives (3½" drives)

"Accessible drives" are e.g. DVD or CD ROM drives, into which a data carrier can be inserted from outside. Non-accessible drives are e.g. hard disk drives.

IDE drives

Four IDE drives are supported as standard equipment. Ideally, hard disks are connected to IDE interface 1 and other drives to IDE interface 2 (see also the technical manual for the mainboard).

SCSI drives

If you want to install a SCSI drive, you require a SCSI controller and a SCSI cable. Details are provided in the manuals on the SCSI controller.

Removing the front panel

►Open the casing (see "Opening the casing" chapter).

a

►Detach the three locking tabs on the left side of the front panel (1).

►Open the left side of the front panel approximately 2-3 cm (a).

A26361-K680-Z122-1-7619, Edition 1 37