Fujitsu V810 Working with floppy disks, To insert a diskette, To remove a diskette, Operation

Operation

Working with floppy disks

Follow the instructions supplied by the vendor of the floppy disks.

i Never clean the floppy disk drives with cleaning disks. Any attempt would destroy the read/write head in the disk drive within 20 seconds.

5

4

1

2

3

1 = Insertion direction

2 = Label area

3 = Write protection tab for a 1.44 Mbyte floppy disk

6 7

4 = Identification of a 1.44 MB floppy disk or write protect switch on a 120 MB floppy disk 5 = Eject button for inserted floppy disks

6 = Disk is write-protected

7 = Disk is not write-protected

To insert a diskette

►Push the floppy disk into the drive in the insertion direction (1) until it engages. The label should be facing upward.

To remove a diskette

►Push the eject button (5).

Protect the floppy disk against being overwritten or erased

►Slide the write-protect slider into position (6). The hole is now visible.

Deactivate write protection

►Slide the write-protect slider into position (7). The hole is now covered.

20 A26361-K680-Z122-1-7619, Edition 1