System expansions
2 |
1 |
►Remove the screw (1) and then remove the USB or
12
►Slide the floppy disk drive into the
►Fasten the floppy disk drive with the screws (2) on both sides of the drive.
►Fit the data and power supply connectors to the floppy disk drive.
►Remove the ports frame for the USB or USB audio ports from the front panel.
►Insert the blanking plate for the USB or USB audio ports into the front panel.
►Attach the front panel (see "Attaching the front panel" chapter).
►Close the casing (see "Closing the casing" chapter).
54 |