Fujitsu V810, R630 manual Setting up the workstation, Connect the monitor, mouse and keyboard

Preparing for use

Setting up the workstation

!	When installing your workstation, give consideration to the recommendations and safety
	notes in the "Safety" booklet.

Set up the workstation only in its correct orientation. The points to observe are illustrated on the following pages.

We recommend that you place your device on a surface with good anti-slip qualities. In view of the multitude of different finishes and varnishes used on furniture, it is possible that the rubber feet will mark the surface they stand on.

Do not expose the workstation to extreme environmental conditions (see "Technical data" chapter).

Provide at least 200 mm of clearance in front of and behind the fan area of the casing to ensure adequate ventilation. In order to avoid overheating, do not cover the ventilation area of the monitor or the workstation.

Do not place several workstations one above the other.

Connect the monitor, mouse and keyboard

The ports for the monitor, mouse, and keyboard are on the rear and front (USB ports, optional) of the workstation.

Keyboard port / purple	PS/2 mouse port / green
Monitor port / blue	USB port / black

6 A26361-K680-Z122-1-7619, Edition 1