12
Installation
DVD SetupDVD SetupDTV SetupDTV Setup
Connections
1. Connect the DVD video outputs to the COMPONENT(Y, PB,
PR) jacks and connect the DVD audio outputs to the AUDIO
jacks.
2. If your DVD only has an S-Video output jack, connect this to
the S-VIDEO input on the TV and connect the DVD audio
outputs to the AUDIO INPUTjacks on the TV, as shown in
the figure.
NOTE:If your DVD player does not have component video
output, use S-Video.
Viewing Setup
1. Turn on the DVD player, insert a DVD.
2. Use the TV/VIDEOor MULTIMEDIA button on the remote
control to select Component(If connected to S-VIDEO,
select the S-V
ideo
input source.)
3. Refer to the DVD player's manual for operating instructions.
- To watch digitally broadcast programs, purchase and
connect a digital set-top box.
Connections
Connect the digital set-top box video outputs to the
COMPONENT(Y, PB, PR) jacks and connect the digital
set-top box audio outputs to the AUDIO jacks.
Viewing Setup
1. Turn on the digital set-top box. (Refer to the owner’s
manual for the digital set-top box.)
2. Use the TV/VIDEOor MULTIMEDIA button on the
remote control to select Component.
DVD
DTV Receiverr (Set-top Box)
Component ports
of the TV Y PBPR
Video output ports
of DVD player
Y
Y
Y
Y
Pb
B-Y
Cb
PB
Pr
R-Y
Cr
PR
Using HeadphonesUsing Headphones
- Plug headphones in to H/Pjack as shown.
- Adjust sound level to a headphone using the volume (F,G)
buttons. While you are listening to sound through a head-
phone(s), TV speakers will not be heard.
•Component Input ports
To get better picture quality, connect a DVD player to
the component input ports as shown below.