WATCHING TV / CHANNEL CONTROL

TURNING ON TV

1

First, connect power cord correctly.

At this moment, the TV switches to standby mode.

In standby mode to turn TV on, press the , INPUT, CH (+ or -)button on the TV or press the POWER, INPUT, TV, CH (+ or -), Number (0~9) button on the remote control.

WATCHING TV / CHANNEL CONTROL

2Select the viewing source by using the INPUT button on the remote con- trol.

This TV is programmed to remember which power state it was last set to, even if the power cord is out.

When finished using the TV, press the POWER button on the remote

3control. The TV reverts to standby mode.

!NOTE

G If you intend to be away on vacation, disconnect the power plug from the wall power outlet.

CHANNEL SELECTION

1Press the CH (+ or -)or NUMBER buttons to select a channel number.

VOLUME ADJUSTMENT

Adjust the volume to suit your personal preference.

1Press the VOL (+ or -)button to adjust the volume.

2If you want to switch the sound off, press the MUTE button.

3You can cancel the Mute function by pressing the MUTE or VOL (+ or -)button.

40

Page 42
Image 42
LG Electronics 1930 owner manual Turning on TV, Channel Selection, Volume Adjustment