01. Power (Command2:a)

To control Power On/Off of the TV.

Transmission [k][a][ ][Set ID][ ][Data][Cr]

Data 0 : Power Off Data 1 : Power On Acknowledgement [a][ ][Set ID][ ][OK/NG][Data][x]

*In a like manner, if other functions transmit ‘FF’ data based on this format, Acknowledgement data feedback presents status about each function.

*In this model, TV will send the Acknowledge after power on processing completion.

*There might be a time delay between command and acknowledgement.

02.Input Select (Command2:b) (Main Picture Input) To select input source for the TV.

Transmission [k][b][ ][Set ID][ ][Data][Cr]

Data 0: DTV

Data 5: Component 2

Data 1: Analog

Data 7: RGB-PC

Data 2: AV1

Data 8: HDMI1/DVI

Data 3: AV2

Data 9: HDMI2

Data 4: Component 1

 

 

 

Acknowledgement [b][

][Set ID][ ][OK/NG][Data][x]

03. Aspect Ratio (Command2:c) (Main picture format) To adjust the screen format.

You can also adjust the screen format using the RATIO button on remote control or in the Option menu. Transmission [k][c][ ][Set ID][ ][Data][Cr]

Date 1: 4:3

5:

Zoom 2

2: 16:9

6:

Set by program

3:Horizon

4:Zoom 1

Acknowledgement [c][ ][Set ID][ ][OK/NG][Data][x]

04.Screen Mute (Command2:d) To select screen mute on/off.

Transmission [k][d][ ][Set ID][ ][Data][Cr] Data 0 : Screen mute off (Picture on)

Data 1 : Screen mute on (Picture off) Acknowledgement [d][ ][Set ID][ ][OK/NG][Data][x]

05. Volume Mute (Command2:e) To control volume mute on/off.

You can also adjust mute using the MUTE button on remote control.

Transmission [k][e][ ][Set ID][ ][Data][Cr] Data 0 : Volume mute on (Volume off) Data 1 : Volume mute off (Volume on) Acknowledgement [e][ ][Set ID][ ][OK/NG][Data][x]

06. Volume Control (Command2:f) To adjust volume.

You can also adjust volume with the volume buttons on remote control.

Transmission [k][f][ ][Set ID][ ][Data][Cr]

Data Min : 0 ~ Max : 64

Refer to ‘Real data mapping’ as shown below. Acknowledgement [f][ ][Set ID][ ][OK/NG][Data][x]

07.Contrast (Command2:g) To adjust screen contrast.

You can also adjust contrast in the Video menu. Transmission [k][g][ ][Set ID][ ][Data][Cr] Data Min : 0 ~ Max : 64

Refer to ‘Real data mapping’ as shown below. Acknowledgement [g][ ][Set ID][ ][OK/NG][Data][x]

08.Brightness (Command2:h) To adjust screen brightness.

You can also adjust brightness in the Video menu. Transmission [k][h][ ][Set ID][ ][Data][Cr]

Data Min : 0 ~ Max : 64(*transmit by Hexadecimal code) Refer to ‘Real data mapping’ as shown below. Acknowledgement [h][ ][Set ID][ ][OK/NG][Data][x]

09. Color (Command2:i)

To adjust the screen color.

You can also adjust color in the Video menu.

Transmission [k][i][ ][Set ID][ ][Data][Cr]

Data Min : 0 ~ Max : 64

Refer to ‘Real data mapping’ as shown below. Acknowledgement [i][ ][Set ID][ ][OK/NG][Data][x]

*Real data mapping 0 : Step 0

A : Step 10 (SET ID 10)

F : Step 15 (SET ID 15)

10 : Step 16 (SET ID 16)

63 : Step 99 (SET ID 99)

64 : Step 100

*Tint : R50 ~ G50

*Balance : L50 ~ R50

APPENDIX

85

Page 87
Image 87
LG Electronics 26LC7D owner manual Set ID OK/NGDatax