LG Electronics 26LC7D owner manual Set ID DataCr

APPENDIX

APPENDIX

10. Tint (Command2:j) To adjust the screen tint.

You can also adjust tint in the Video menu.

Transmission [k][j][ ][Set ID][ ][Data][Cr]

Data Red : 0 ~ Green : 64

*Refer to ‘Real data mapping’. G p.85.

Acknowledgement [ j ][ ][Set ID][ ][OK/NG][Data][x]

11. Sharpness (Command2:k) To adjust the screen sharpness.

You can also adjust sharpness in the Video menu. Transmission [k][k][ ][Set ID][ ][Data][Cr]

Data Min: 0 ~ Max: 64

*Refer to ‘Real data mapping’. G p.85.

Acknowledgement [k][ ][Set ID][ ][OK/NG][Data][x]

12. OSD Select (Command2:l)

To select OSD (On Screen Display) on/off.

Transmission [k][l][	][Set ID][ ][Data][Cr]
Data 0: OSD off	Data 1: OSD on

Acknowledgement [l][ ][Set ID][ ][OK/NG][Data][x]

13. Remote Control Lock Mode (Command2:m) To lock the remote control and the front panel controls on the set.

Transmission [k][m][ ][Set ID][ ][Data][Cr]

Data 0: Lock off Data 1: Lock on Acknowledgement [m][ ][Set ID][ ][OK/NG][Data][x] If you’re not using the remote control and front panel controls on the TV, use this mode. When main power is on/off, remote control lock is released.

14 . Treble (Command2:r) To adjust treble.

You can also adjust treble in the Audio menu. Transmission [k][r][ ][Set ID][ ][Data][Cr]

Data Min: 0 ~ Max: 64(*transmit by Hexadecimal code) *Refer to ‘Real data mapping’. G p.85.

Acknowledgement [r][ ][Set ID][ ][OK/NG][Data][x]

15 . Bass (Command2:s) To adjust bass.

You can also adjust bass in the Audio menu.

Transmission [k][s][ ][Set ID][ ][Data][Cr]

Data Min: 0 ~ Max: 64(*transmit by Hexadecimal code) *Refer to ‘Real data mapping’. G p.85.

Acknowledgement [s][ ][Set ID][ ][OK/NG][Data][x]

16. Balance (Command2:t) To adjust balance.

You can also adjust balance in the Audio menu.

Transmission [k][t][ ][Set ID][ ][Data][Cr]

Data Min: 0 ~ Max: 64(*transmit by Hexadecimal code) *Refer to ‘Real data mapping’. G p.85.

Acknowledgement [t][ ][Set ID][ ][OK/NG][Data][x]

17. Color Temperature (Command2:u) To adjust color temperature.

You can also adjust color temperature in the Video menu.

Transmission [k][u][ ][Set ID][ ][Data][Cr]

Data 0: Medium 1: Cool 2: Warm 3: User

Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x]

18. Channel Tuning (Command: m a)

To tune channel to following physical/major/minor number. Transmission [m][a][ ][Set ID][ ][Data0][ ][Data1]

[ ][Data2][ ][Data3][ ][Data4][ ][Data5][Cr]

Digital channels have a Physical, Major, and Minor channel number. The Physical number is the actual digital channel number, the Major is the number that the channel should be mapped to, and the Minor is the sub-channel. Since the ATSC tuner automatically maps the channel to the Major number, the Physical number is not required when sending a command.

Data 0: Physical Channel Number

NTSC air: 02~45, NTSC cable: 01, 0E~7D

ATSC air: 01~45, ATSC cable: 01~87

Data1 & 2: Major Channel Number

Data1: High byteData2: Low byte

Two bytes are available for the Major and Minor, nor- mally only the second byte is used.

Data3 & 4: Minor Channel Number

Not needed for NTSC.

86