USING THE MONITOR SET 13

USING THE MONITOR SET

Connecting to a PC

yyYour Monitor set supports Plug & Play*.

*Plug & Play: A PC recognizes a connected device that users connect to a PC and turn on, without device configuration or user intervention.

DVI-D connection

Transmits a digital video signal from your PC to the Monitor set. Connect the PC and the Monitor set with a DVI cable as shown in the following illustrations.

ENGLISH

D-SUB connection

Transmits analog video from your PC to the Monitor set. Connect the PC and the Monitor set with the supplied D-sub 15 pin signal cable as shown in the following illustrations.

19M37D 20M37D 22M37D 22MC37D 24M37D 27M37D 27MP37VQ24MC37D

D-SUB

RGB OUT

PC

NOTE

yyWhen using a D-Sub signal input cable connector for Macintosh

yyMac adapter

For Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density (3 row) D-SUB VGA connector on the supplied cable to a 15 pin 2 row connector.

CAUTION

yyConnect the signal input cable and tighten it by turning the

screws clockwise. yyDo not press the screen with

your finger for a long time as this may result in temporary distortion on the screen.

yyAvoid displaying a fixed image on the screen for a long period of time to prevent image burn. Use a screensaver if possible.

Page 14
Image 14
LG Electronics 22M37A, 27MP37VQ Using the Monitor SET, Connecting to a PC, DVI-D connection, SUB connection, YyMac adapter