LG Electronics 640T-ZA 2012Y IR + Soft Touch LED Lighting Scenario, Power LED Scenario, Spec 내용

2012Y IR + Soft Touch LED Lighting Scenario

Power LED Scenario

	구분		Spec 내용	비고
			- 12Y GP4 High(L9), GP4 Mid(MTK), GP4 Low(S7LR2)
	Power		Æ “ Power Light” UI Delete compared with 11Y(GP3 model)	-
Indicator UI			- 11Y Carry Over Model : 12Y same Power LED scenario process
			Æ “ Power Light “ UI Delete, The way of 11Y Soft Touch Ass’y is used. White LED Disable
		Power On	- Stand-By condition to Red LED On : After DC ON, Red LED light Blinks twice and then Red LED is Off	-
			- Stand-By condition to Red LED Off : After DC ON, Red LED light Blinks three times and then Red LED is Off
		Power Off	- Without Blink, Red LED On immediately	-
			But, If the mode of Power Indicator UI is Stand-By, keep staying Red LED Off status
	User
		Remote Key	- When you put the remote Control button, Red LED Blinks once	-
	Condition
		input
GP4		Warm	- Red LED On stays and In the case of Set On, Red LED turns Off	Same
				as the
		Stand-by	Æ Including DVR Ready model, Japanese model
(High/Mid/Low)
				11Y
Power LED
				Same
Scenario
		3D mode	- Red LED Off (Power On condition is identical)	as the
				11Y
		Factory	- 12Y LED Model : Stand-By On (Red LED On)
		Default	- 12Y CCFL Model : Stand-By On (Red LED On)	-
		Mode	- 11Y Carry Over Model (CS5XX/CM5XX) : Stand-By On (Red LED On)
	Factory
		(In-Stop)	- After In-Stop, Red LED On is processed and after In-Stop, Red LED turns on within 3 sec
	Condition
		Power Only	- In the case of Power Only On, Red LED turns Off	-
		Mode	- In the case of DC Off, Red LED turns On

Copyright © 2012 LG Electronics. Inc. All rights reserved.	LGE Internal Use Only
Only for training and service purposes