6. CI+ Key Download method
6.1.Download Procedure
(1)Press "Power on" key of a service R/C. (Baud rate : 115200 bps)
(2)Connect
(3)Write CI+ Key through
(4)Check whether the key was downloaded or not at ‘In Start’ menu. (Refer to below).
=> Check the Download to CI+ Key value in LGset.
1.Check the method of CI+ Key value a. Check the method on Instart menu
b. Check the method of RS232C Command
1) Into the main ass’y mode (RS232 : aa 00 00)
CMD 1 | CMD 2 |
| Data 0 | |
A | A | 0 |
| 0 |
2)Check the key download for transmitted command (RS232 : ci 00 10)
CMD 1 | CMD 2 |
| Data 0 | |
C | I | 1 |
| 0 |
3)Result value
-Normally status for download : OKx
-Abnormally status for download : NGx
2.Check the method of CI+ key value (RS232)
1)Into the main ass’y mode (RS232 : aa 00 00)
CMD 1 | CMD 2 |
| Data 0 | |
A | A | 0 |
| 0 |
2)Check the mothed of CI+ key by command (RS232 : ci 00 20)
CMD 1 | CMD 2 |
| Data 0 | |
C | I | 2 |
| 0 |
3)result value
i 01 OK 1d1852d21c1ed5dcx
CI+ Key Value
Copyright © | LG Electronics. Inc. All rights reserved. | - 14 - | LGE Internal Use Only |
Only for training and service purposes |
|
| |
