The procedure below assumes that the desired file(s) is/are already loaded onto the USB device. For further information on USB Download Menu functions and file requirements, and/or for information on creating configuration files, refer to the appropriate section(s) in this document.
Before You Begin
•Ensure the USB device to be used has been formatted with FAT format.
•If you intend to use the Zoning feature(s) on this TV, make sure to assign the appropriate TV Zone # and/or
•Refer to “Custom Master TV Setup” on pages 32 to 35 for information on creating a TLX or TLL file for cloning purposes, and/or refer to “Creating an FTG Configuration File” on pages 42 to 43 for information on creating an FTG Configuration (.tlx) file for FTG Mode configuration.
•See Reference section, “Downloading a Splash Screen using a USB Memory Device,” for splash screen image guidelines.
•See Reference section, “Upgrading TV/PTC Software using a USB Memory Device,” for further information on software upgrades.
USB Configuration via
With either the TV Configuration Options or the Zones, Label, and Room Number screen on display, proceed as follows to configure the TV using the USB memory device.
1.Insert the USB memory device that contains the appropriate file(s) into either of the TV’s USB ports.
2.Use the arrow keys on the Installer Remote to select USB Configuration, and then press OK. You will be redirected to the TV’s USB Download Menu:
USB Download Menu
Upgrade TV Software
Upgrade PTC Software
Diagnostics
Teach To TV (TLL)
Teach To TV (TLX)
Previous | OK |
Note: You can press 
on the Installer Remote at any time to return to the
3.Select the appropriate option from the USB Download Menu, and complete the download as required.
Note: If you perform a software upgrade from the USB Download Menu, the TV will complete the upgrade and then reboot. Upon restart, the TV will display the
4.Remove the USB memory device, and verify that the appropriate configuration is resident on the TV.
19 |