IP Environment Setup (Cont.)

Wired Network Connection

1.The next Network Connection window will enable you to specify the IP and DNS configuration for this TV. Auto (DHCP) tabs will be selected by default. If a DHCP server is configured and a static configuration is not required, you can simply select OK (on the screen) and then press OK on the Installer Remote. The DHCP server will assign an IP address and DNS server to the TV once the TV successfully connects to the network.

Otherwise, use the arrow keys to select the Static tab(s), and specify the static configuration data for both the IP and DNS modes. When all fields are completed, select OK (on the screen) and press OK on the Installer Remote.

Note: You can specify a static DNS server with an auto- configured IP address but not vice versa.

The TV will attempt to connect to the network and you will see a progress screen that indicates status as each network element is confirmed (see example at right). If the network is connected successfully, a “Wired network is connected” message will be displayed at the top of the screen and the network configuration data will be displayed in the lower half of the screen.

2.Select Complete (if not already selected), and then press OK on the Installer Remote to exit the Network Connection wizard and return to the IP Environment Menu.

Note: If the network connection is not successful, the progress screen will identify the network element in which the connection failed. Check your cabling and/or, if necessary, press on the Installer Remote to return to the Configure IP and DNS Modes screen to verify the configuration data.

Wireless Network Connection

Note: If you intend to use the Wi-Fi Zoning feature with cloning configuration, you must configure the wireless network connection as part of the Master TV Setup.

1.In the next Network Connection window, use the arrow keys on the Installer Remote to select the type of wireless connection to configure and press OK.

•AP List: Select from a list of available access points.

•Enter the SSID: Direct enter the SSID of an access point whose SSID has not been enabled for broadcast (i.e., the access point does not appear in the AP List).

•WPS-PBC: Connect to a network via an access point that is enabled for PBC.

•WPS-PIN: Complete network/PIN verification via the access point web interface.

•Ad-hoc: Connect to a network via a Wi-Fi device, such as a PC, mobile phone, etc.

Network Connection

Configure IP and DNS modes.

Auto (DHCP) or Static

IP Mode

Auto (DHCP)

 

 

Static

 

 

IP Address

 

 

 

 

 

 

 

0

0

0

0

 

Subnet Mask

 

 

 

 

 

 

 

 

0

0

0

0

 

 

 

 

 

 

 

Gateway

 

 

0

0

0

0

DNS Mode

Auto (DHCP)

 

 

 

 

 

 

Static

 

 

 

 

 

 

 

 

DNS Server

0

0

0

0

OK

Network Connection

Wired network is connected.

 

 

 

 

 

 

TV

Gateway

DNS

Internet

MAC Address

: AA:BB:CC:DD:EE:23

Gateway

: 10.10.10.10

IP Address

: 10.2.3.4

DNS Server

: 10.5.6.7

Subnet Mask

: 255.255.255.0

 

 

 

 

Complete

Network Connection

Select the type of wireless network connection.

 

AAA

 

 

 

 

 

 

AP List

 

BBB

 

 

 

 

 

 

CCC

 

 

 

 

 

Enter the SSID

 

DDD

 

 

 

 

 

 

 

EEE

 

 

 

 

 

 

WPS-PBC

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

WPS-PIN

 

 

 

 

 

 

 

 

 

Choose from APs to connect to the network.

Ad-hoc

(Continued on next page)

54

206-4263