IP Environment Setup (Cont.)
(Continued from previous page)
Note: Make sure you have the network security password/PIN available if you are attempting to connect to a secured network.
Note: (AP List and Enter the SSID options only) As with a wired connection, a second Network Connection window will enable you to specify the IP and DNS configuration for this network connection. Auto (DHCP) tabs will be selected by default. If a DHCP server is configured and a static configuration is not required, you can simply select OK (on the screen) and then press OK on the Installer Remote. The DHCP server will assign an IP address and DNS server to the TV for this network connection once the TV successfully connects to the network. Otherwise, use the arrow keys to select the Static tab(s), and specify the static configuration data for both the IP and DNS modes. When all fields are completed, select OK (on the screen) and press OK on the Installer Remote.
2.Follow the
Once you have specified configuration details as necessary, |
| Network Connection |
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| |
the TV will attempt to connect to the network and you will |
|
|
| Wireless network is connected. |
| |||||
see a progress screen that indicates status as each network |
|
|
|
|
|
|
|
|
|
|
element is confirmed (see example at right). If the network is |
|
| TV |
| Gateway | DNS | Internet |
| ||
connected successfully, a “Wireless network is connected” |
|
|
|
| ||||||
|
|
|
| Wireless : NetworkName |
|
|
|
| ||
message will be displayed at the top of the screen and the |
|
| MAC Address : AA:BB:CC:DD:EE:23 | Gateway | : 10.10.10.10 |
|
|
| ||
|
|
|
|
|
| |||||
network configuration data will be displayed in the lower half |
|
| IP Address | : 10.2.3.4 | DNS Server | : 10.5.6.7 |
|
|
| |
|
| Subnet Mask : 255.255.255.0 |
|
|
|
|
| |||
of the screen. |
|
|
|
|
|
|
|
|
|
|
|
|
|
| Complete |
|
|
|
| ||
3.Select Complete (if not already selected), and then press OK on the Installer Remote to exit the Network Connection wizard and return to the IP Environment Menu.
Note: If the network connection is not successful, the progress screen will identify the network element in which the connection failed. Check your cabling and/or, if necessary, press 
on the Installer Remote to return to previous screens to verify the configuration data.
Network Status
This option enables you to check the status of the network connection.
Note: If both wired and wireless network connections were configured in a previous session in the IP Environment Menu, and a LAN cable is connected/detected between the TV and the network, the Network Status operation first will attempt to connect to the network via the wired connection. If a wired connection is not detected, the Network Status then will attempt a wireless connection, if one has been configured. On the other hand, if, during the current session, you configured first a wired and then a wireless network connection, the Network Status operation will first attempt to connect to the network via the wireless connection (i.e., the last connection configured).
1.With the IP Environment Menu on display, use the arrow keys on the Installer Remote to select Network Status. Then, press OK.
(Continued on next page)
55 |