IP Environment Setup (Cont.)

(Continued from previous page)

The TV will display a status screen as it confirms each of the network elements, including the TV status, the gateway status, the DNS status, and the Internet status (see example at right). If the network is connected successfully, a “Wired/Wireless network is connected” message will be displayed at the top of the screen and the network configuration data will be displayed in the lower half of the screen.

Note: If a problem is detected, the status screen will identify the network element in which the connection failed. Check cabling and/or configuration data, as necessary. If the status screen

is still on display, you can select Try again and press OK to recheck the network status.

2.When the status screen shows that the network is connected, select Complete (if not already selected) and press OK on the Installer Remote to return to the IP Environment Menu.

Note: If you cancel the status check while it is in progress, the TV will exit both the status window and the IP Environment Menu. If you wish to return to the IP Environment Menu while the status check is in progress, press on the Installer Remote.

IP Stream Control

If necessary, due to an audio and/or video stream delay, IP Stream Control options enable you to compensate for synchronization irregularities by allowing audio PTS, video PTS, and PCR offset modifications. This menu also enables you to specify the IGMP version (2 or 3). Note that any modifications to these settings should be performed by qualified personnel only.

1.With the IP Environment Menu on display, use the arrow keys on the Installer Remote to select IP Stream Control. Then, press OK.

2.In the IP Stream Control pop-up window, use the Up/Down arrow keys on the Installer Remote to navigate to the appropriate field: Audio PTS Offset, Video PTS Offset, PCR Offset, or IGMP Version.

3.Use the Left/Right arrow keys to set the appropriate value for the selected field.

Note: Offset values represent offset time in milliseconds (ms) and can be adjusted from -500 ms to +500 ms in 10 ms increments.

4.When you have completed all modifications as required, either select Close and then press OK on the Installer Remote or press to return to the IP Environment Menu.

Network Status

Wired network is connected.

 

 

 

 

 

 

TV

Gateway

DNS

Internet

MAC Address

: AA:BB:CC:DD:EE:23

Gateway

: 10.10.10.10

IP Address

: 10.2.3.4

DNS Server

: 10.5.6.7

Subnet Mask

: 255.255.255.0

 

 

 

 

Complete

 

 

 

IP Environment

Move

OK

 

 

 

 

 

 

 

 

 

 

 

 

• Network ConnectionAudio PTS Offset

<

0

 

>

 

 

 

• Network StatusVideo PTS Offset

 

 

 

 

 

 

 

<

0

 

>

 

 

 

• IP StreamPCRontrolOffset

 

 

 

 

 

 

 

<

0

 

>

 

 

 

• Pro:CentricIGMP Version

 

 

 

 

 

 

 

<

2

 

>

 

 

 

• Wake On LAN

 

 

 

 

 

 

 

• Media Share

 

 

 

 

 

 

 

Pre-loaded Apps

 

 

 

 

Close

56

206-4263