M aintenance

Before cleaning the washer interior, unplug the electrical power cord to avoid electrical shock to avoid electrical shock hazards.

When disposing of the appliance, cut off the mains cable, and destroy the plug disable the door lock to prevent young children being trapped inside.

The water inlet filter

-" " error message will blink on the control panel when water does not enter the detergent drawer.

-If water is very hard or contains traces of lime deposit, the water inlet filter may become clogged.

It is therefore a good idea to clean it from time to time.

1. Turn off the water tap.

2. Unscrew the water inlet hose.

3. Clean the filter using a hard bristle brush.

4. Tighten up the inlet hose.

25

Page 25
Image 25
LG Electronics 2P~32P, 33P~63P owner manual Aintenance, Water inlet filter