6 Be sure to press the adhesive parts of the brackets firmly to the appliance.
7 Install the eight (8) screws (supplied) to attach the brackets to the pedestal.
8 Move the washer/combo to the desired place. NOTE: The appliance and pedestal assembly
must be placed on a solid and level floor for proper operation. Adjust the legs of the appliance and pedestal by turning with a wrench. Then, adjust the lock nut toward the pedestal while holding the pedestal leg using a wrench.
Lock nut
Adjustable
feet
HigherLower
Adjustable | Adjustable |
feet | feet |
DRYER INSTALLATION
1 Remove pedestal, installation hardware, and instructions from the shipping carton.
2 Position dryer on top of the pedestal. NOTE: Because of the weight of the dryer,
two or more people may be needed.
NOTE: If dryer was previously installed, uninstall it as follows:
A. Uninstalling an electric dryer:
1)Unplug the power supply cord,
2)Pull the dryer away from the wall enough to loosen the vent clamp. Loosen the clamp and carefully remove the exhaust vent from the dryer exhaust outlet.
B.Uninstalling a gas dryer:
1)Unplug power supply cord.
2)Turn off the gas supply.
3)Pull the dryer away from the wall enough to loosen the vent clamp. Loosen the clamp and carefully remove the exhaust vent from the dryer exhaust outlet.
for washer/
for washer/
combo
combo
for dryer
for dryer
fordryer
for washer/
for washer/
combo
combo
3 Remove the paper from the bracket.
3
