4iCAM4000 Installation
206.4
181.6
.841 4
011
HOLE
HOLE
HOLE
HOLE
HOLE
HOLE
HOLE
.62 7
551
210

Dimensions and Screw Holes on the Rear Enclosure

68.5
25 43.5 8
9
.841 4
42.9
Wall
Rotation Part with Front Enclosure Rear Enclosure

Dimensions of iCAM4000 (mm unit)

1. Remove the two security screws (use included security bit wrench) from the bottom of the iCAM

2. While gently pulling the cover upward on the back plate, pull forward.

3. Position the iCAM back plate on the desired wall near the secured door and mark the holes as the figure below

illustrates. The recommended height from the floor to bottom of unit is 142cm (56”), however the installation

height can be adjusted depending on average user height.