LG Electronics 28LY560M, 42LY560M Preventing image burn or burn-in on your TV screen, Dot Defect

IMPORTANT SAFETY INSTRUCTIONS 5

••Dot Defect

The panel is a high technology product with resolution of two million to six million pixels. In a very few cases, you could see fine dots on the screen while you’re viewing the TV.

Those dots are deactivated pixels and do not affect the performance and reliability of the TV.

••Generated Sound

Cracking noise: A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to temperature and humidity. This noise is common for products where thermal deformation is required. Electrical circuit humming/panel buzzing: A low level noise is generated from a high-speed switching circuit, which supplies a large amount

of current to operate a product. It varies depending upon the product. This generated sound does not affect the performance and reliability of the product.

••Take care not to touch the ventilation openings. When watching the TV for a long period, the ventilation openings may become hot. This does not affect the performance of the product or cause defects in the product.

••Do not install this product on a wall if it could be exposed to oil or oil mist. This may damage the product and cause it to fall.

••If the TV feels cold to the touch, there may be a small flicker when it is turned on. This is normal; there is nothing wrong with TV.

Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, they have no adverse effect on the TV’s performance. Avoid touching the LCD screen or holding your finger(s) against it for long periods of time. Doing so may produce some temporary distortion effects on the screen.

Preventing image burn or burn-in on your TV screen

••If a fixed image displays on the TV screen for a long period of time, it will be imprinted and become a permanent disfigurement on the screen. This is image burn or burn-in and not covered by the warranty.

••If the aspect ratio of the TV is set to 4:3 for a long period of time, image burn may occur on the letterboxed area of the screen.

••Avoid displaying a fixed image on the TV screen for a long period of time to prevent image burn.

ENGLISH