Express Script Installer Menu Wizard (Cont.)
Configure Pro:Centric Settings
The next wizard screen enables you to set up the Pro:Centric feature of the TV. By default, the Data Channel is configured for Auto Search, which enables the TV’s Data Channel Auto Search feature to set the Data Channel value. See item 119 DATA CHANNEL description on page 30 for further information on the Data Channel Auto Search feature. The Pro:Centric Mode default setting is “Configuration Only,” which enables remote management only. That is, the TV will search for TV
If you wish to proceed with the wizard without changing the default values for the Pro:Centric settings, you can simply select Next and press OK on the Installer Remote. Or, if you wish to exit the wizard while retaining the default values for Pro:Centric settings, use the arrow keys on the Installer Remote to select Done, and then press OK.
If you already know the Pro:Centric settings that need to be configured in order for the TV to connect to the Pro:Centric server and/or if the Pro:Centric server is not yet installed, follow the procedure below to expedite the setup process. Use the Up/Down arrow keys on the Installer Remote to navigate between the fields.
Note: If you wish to disable the Pro:Centric feature of the TV, select the Data Channel field, and then use the Left/Right arrow keys on the Installer Remote to select Disabled. From here, you may opt to proceed with the wizard (select Next) or save this setting and exit the wizard (select Done). See also step 3 below.
1.Refer to the appropriate subsection below, depending on the Pro:Centric server configuration, to complete the Media Type and related (Data Channel or IP) fields.
RF Configuration
a)In the Media Type field, use the Left/Right arrow keys on the Installer Remote to select RF.
b)In the Data Channel field, either key in or use the Left/Right arrow keys to select the RF channel number that will be used by the Pro:Centric server as its data channel. The Data Channel value can be set from 1 to 135. *
IP Configuration
Installer Menu Wizard
Set up the Pro:Centric feature of the TV
| Media Type |
| RF |
| ||
| Data Channel |
|
|
|
| |
|
|
| Auto Search |
| ||
| Pro:Centric Mode |
|
|
|
|
|
|
|
|
| Configuration Only |
| |
|
|
|
|
|
| |
| Done |
|
|
| Next |
|
|
|
|
|
|
|
|
PTC: V1.00.020 CPU: V03.11.00.01 ASIC: D279 |
|
| OK CC Exit | |||
Pro:Centric Configuration Screen with
RF Media Fields
a)In the Media Type field, use the Left/Right arrow keys on the Installer Remote to select IP.
Note: By default, the Pro:Centric wizard screen initially shows RF configuration fields. When you select “IP” as the Media Type, the Data Channel field is replaced with (IP) Address and Port fields.
b)In the Address and Port fields, either key in or use the Left/ Right arrow keys to select the appropriate values for the Pro:Centric server IP address and port number.
Installer Menu Wizard
Set up the Pro:Centric feature of the TV
| Media Type |
| ► | IP | ► |
| |||
| Address | 255 | 255 | 255 | 255 |
|
| ||
| Port |
|
|
|
|
|
|
|
|
|
|
|
| 0 |
|
|
| ||
| Pro:Centric Mode |
|
| Configuration Only |
|
| |||
|
|
|
|
|
|
|
|
|
|
| Done |
|
|
|
| Next |
|
|
|
|
|
|
|
|
|
|
|
|
|
PTC: V1.00.020 CPU: V03.11.00.01 ASIC: D279 |
|
|
|
|
|
| OK CC Exit | ||
The IP address must match the IPv4 multicast address and the port number must match the port number that is set in the Pro:Centric server.
*PCS150R and later Pro:Centric servers do not support HRC or IRC cable channel frequencies.
Pro:Centric Configuration Screen with
IP Media Fields
(Continued on next page)
13 |