EXTERNAL CONTROL DEVICE SETUP 37
* Commands may work differently depending on model and signal.
01.Power (Command: k a) ►►To control Power Off of the set.
Transmission[k][a][ ][Set ID][ ][Data][Cr]
Data 00 : Power Off
Ack [a][ ][Set ID][ ][OK/NG][Data][x] ►►To Show Power On. (Works TV is On Only)
Transmission [k][a][ ][Set ID][ ][FF][Cr] Ack [a][ ][Set ID][ ][OK][01][x]
*Similarly, if other functions transmit ‘FF’ data based on this format, Acknowledgement feedback presents status about each function.
*In case of video mute on only, TV will display On Screen Display(OSD). But, in case of Screen mute on, TV will not display OSD.
04. Volume Mute (Command: k e)
►►To control volume mute on/off.
You can also adjust mute using the MUTE button on remote control.
Transmission [k][e][ ][Set ID][ ][Data][Cr]
Data 00 : Volume mute on (Volume off) 01 : Volume mute off (Volume on)
Ack [e][ ][Set ID][ ][OK/NG][Data][x]
02.Aspect Ratio (Command: k c) (Main Picture Size)
►►To adjust the screen format. (Main picture format) You can also adjust the screen format using the Aspect Ratio in the Q.MENU. or PICTURE menu.
Transmission [k][c][ ][Set ID][ ][Data][Cr]
Data 01 : Normal screen | 07 : 14:9 | |
| (4:3) | (Europe, Colombia, |
02 | : Wide screen | Asia except South Korea and |
| (16:9) | Japan) |
04 | : Zoom | 09 : * Just Scan |
05 | : Zoom 2 | 0B : Full Wide |
(Latin America | (Europe, Colombia, Mid- | |
except Colombia | East, Asia except South | |
Only) | Korea and Japan) | |
06 | : Set by Program/ 10 to 1F : Cinema Zoom 1 | |
| Original | to 16 |
Ack [c][ ][Set ID][ ][OK/NG][Data][x]
*Using the PC input, you select either 16:9 or 4:3 screen aspect ratio.
*In DTV/HDMI/Component mode
*Full wide mode may work differently based on model and is supported for DTV fully, and ATV, AV partially.
03.Screen Mute (Command: k d) ►►To select screen mute on/off.
Transmission [k][d][ ][Set ID][ ][Data][Cr]
Data 00 : Screen mute off (Picture on) Video mute off
01 : Screen mute on (Picture off)
10 : Video mute on
Ack [d][ ][Set ID][ ][OK/NG][Data][x]
05. Volume Control (Command: k f)
►►To adjust volume.
You can also adjust volume with the volume buttons on remote control.
Transmission [k][f][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64
Ack [f][ ][Set ID][ ][OK/NG][Data][x]
06. Contrast (Command: k g)
►►To adjust screen contrast.
You can also adjust contrast in the PICTURE menu.
Transmission [k][g][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64
Ack [g][ ][Set ID][ ][OK/NG][Data][x]
07. Brightness (Command: k h)
►►To adjust screen brightness.
You can also adjust brightness in the PICTURE menu.
Transmission [k][h][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64
Ack [h][ ][Set ID][ ][OK/NG][Data][x]
08. Color/Colour (Command: k i)
►►To adjust the screen Color(Colour).
You can also adjust colour in the PICTURE menu. Transmission [k][i][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
Ack [i][ ][Set ID][ ][OK/NG][Data][x]
