LG Electronics 50PS30, 42PQ30, 42PQ20, 42PQ60 Stand Instruction, Detachment, Protection Cover

STAND INSTRUCTION

■Image shown may differ from your TV.

■This part of STAND INSTRUCTION mainly use picture for 42PQ30/60 models.

Installation	Detachment
1 Carefully place the TV screen side down on a	1 Carefully place the TV screen side down on a
cushioned surface to protect the screen from	cushioned surface to protect the screen from
damage.	damage.

2 Assemble the TV as shown. 2 Loose the bolts from TV.

3	Fix the 4 bolts securely using the holes in the
	back of the TV.

3 Detach the stand from TV.

PREPARATION

!NOTE

FRONT

GWhen assembling the stand, make sure to distinguish and assemble the front and rear side of the stand correctly.

G When assembling the desk type stand, check whether the bolt is fully tightened. (If not tight- ened fully, the product can tilt forward after the product installation). If you tighten the bolt with excessive force, the bolt can deviate from abrasion of the tightening part of the bolt.

Protection Cover

After removing the stand, install the included protection cover over the hole for the stand. Press the PROTECTION COVER into the TV until you hear it click.

11