62 Plasma TV
Operation
- Automatically finds all channels available through antenna or cable inputs, and stores them in memory on the channel list.
- Run EZ Scan again after any Antenna/Cable connection changes.
- Apassword is required to gain access to EZ Scan menu if the Lock System is turned on.
1. Press the MENU button and then use D/Ebutton to select the SETUP menu.
2. Press the Gbutton and then use D/Ebutton to select EZ Scan.
3. Press the ENTER button to begin the channel search.
Allow EZ Scan to complete the channel search cycle for ANTENNA, and CABLE.
1. Press the MENU button and then use D/Ebutton to select the SETUP menu.
2. Press the Gbutton and then use D/Ebutton to select Manual Scan.
3. Press the Gbutton and then use D/Ebutton to select TV, DTV, CATV, and
CADTV.
4. Press the Gbutton and then use D/Ebutton to select channel number you
want to add or delete.
5. Press the ENTER button to add or delete for the channel number.
6. Press EXIT button to return to TV viewing or press MENU button to return to the
previous menu.
Notes:
• This channel number is a physical channel number, which is different from the normal channel number shown in Channel
Edit.
• When a cable box connects to the physical channel 2,3 or 4 in the TV Guide On Screen system Setup, cable chan-
nels(CATV or CADTV) will not be scanned by EZ Scan or Manual Scan.
• When inserting the CableCARDTM, CATV, CADTV is not working in Manual Scan.
• TV: analog antenna(over-the-air) TV signal
DTV: digital antenna(over-the-air) TV signal
CATV: analog cable TV signal
CADTV: digital cable TV signal
EZ Scan (Channel Search)EZ Scan (Channel Search)Setup Menu Options
Setup Menu Options
Manual ScanManual Scan- Apassword is required to gain access to Manual Scan menu if the Lock System is turned on.