86 Plasma TV
Operation
- PIP lets you view 2 different inputs (sources) on your TV screen at the same time. One source will be large, and the other
source will show a smaller inset image.
- Twin Picture mode splits the screen into two images, allowing two picture sources to be shown on the TV screen at the same
time. Each source is given half the screen.
- In PIP/POP/Twin Picture mode, the screen savers such as "No Signal", "Rating Blocked" , "Channel Blocked", or "Aux
Blocked" may not be displayed on screen.
Press the PIP button to access the sub picture. Each press of PIP changes the PIPoptions as shown below.
PIP Off
PIP Mode POP Mode Twin Picture Mode
1. Press the PIP button.
2. Select the Antenna or Cable option on the Sub input menu or with the PIP INPUT button. Use the PIPCH+ /
PIPCH- button to select a channel for the sub picture.
(You can’t select DTV for main and sub picture simultaneously).
Repeatedly, press the SWAPbutton to switch the main and sub pictures.
• Component 1, Component 2, RGB-PC (or RGB-DTV), HDMI/DVI input sources for the main picture can’t be used to
swap the main and sub pictures.
Use the PIPINPUT button to select the input source for the sub picture. Each press of PIPINPUT button changes
the PIP source. You can also select sources for the Sub Inputin the SETUP menu.
Main Picture Source Available Sub Picture Sources
DTV
Analog
Analog, Video, and Front Video
DTV, Analog, Video, and Front Video
Main Picture Sub Picture Main Picture Sub Picture
FTV 2-0
TV 4-0
TV 6-0
E
D
Normal Mode

PIP (Picture-In-Picture) / POP / Twin Picture

Remote ControlRemote Control
W
Watching PIP/POP/T
atching PIP/POP/Twin Picture
win Picture
Selecting an Input Signal Source for PIP/T
Selecting an Input Signal Source for PIP/Twin Picture
win Picture
Swapping the PIP
Swapping the PIP/T
/Twin Picture
win Picture
TV Program selection for PIP
TV Program selection for PIP