LG Electronics 55UF7600, 49UF7600 Using the Joystick Button, Mounting on a Table, Basic Functions

Using the Joystick Button

(Depending upon model)

(Image shown may differ from your TV.)

You can operate the TV by pressing the button or moving the joystick left, right, up, or down.

Joystick Button

Basic Functions

		When the TV is turned off,
	Power On	place your finger on the
		joystick button, press it once,
		and release it.
		When the TV is turned on,
		place your finger on the
ENGLISH	Power Off	joystick button, press it once
		for a few seconds, and release
		it. All running apps will close
		and any recording in progress
		will stop.
	Volume	If you place your finger over
		the joystick button and move
	Control	it left or right, you can adjust
		the volume level.
	Channels	If you place your finger over
		the joystick button and move
	Control	it up or down, you can scroll
		through the saved channels.

NOTE

•With your finger over the joystick button move it up, down, left, or right. Be careful not to press the joystick button. If you press the joystick button first, you may not be able to adjust the volume level and/or scroll through saved channels.

Adjusting the Menu

When the TV is turned on, press the joystick button one time.

You can adjust the menu items moving the joystick button up, down, left, or right.

Turns the power off.

Accesses the quick settings.

Clears on-screen displays and returns to TV viewing.

Changes the input source.

Mounting on a Table

(Image shown may differ from your TV.)

1Lift and tilt the TV into its upright position on a table.

-Leave a 10 cm (4 inches) (minimum) space from the wall for proper ventilation.

10 cm (4 inches)

10 cm

10 cm
10	cm

2Connect the power cord to a wall outlet.

CAUTION

•Do not place the TV near or on sources of heat, as this may result in fire or other damage.

Securing the TV to a Wall (optional)

(Depending upon model)

1Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV.

-If there are bolts inserted at the eye-bolts position, remove the bolts first.

2Mount the wall brackets with the bolts to the wall. Match the location of the wall bracket and the eye-bolts on the rear of the TV.

3Connect the eye-bolts and wall brackets tightly with a sturdy rope or cable. Make sure to keep the rope parallel to the flat surface.

10