LG Electronics 49UF7600, 55UF7600 Connections Notifications, Connecting to an Antenna or Cable

••When using the wall mounting bracket, apply the adhesive protective label to cover the unused stand openings. This will prevent the accumulation of dust and dirt. (Use only when provided with your particular model.)

Provided Item

Adhesive protective label

••When removing the stand covers, insert a flat tool below the arrows. (e.g., a flat screwdriver) (For 79UF7700)

Connections (Notifications)

ENGLISH	You can connect various external devices to the TV.
	For more information on an external device’s
	Supported external devices are: HD receivers, DVD
	players, VCRs, audio systems, USB storage devices,
	PC, gaming devices, and other external devices.
	connection, refer to the manual provided with
	each device.

NOTE

••If you record a TV program on a DVD recorder or VCR, make sure to connect the TV signal input cable to the TV through a DVD recorder or VCR. For more information about recording, refer to the manual provided with the connected device.

••The external device connections shown may differ slightly from illustrations in this manual.

••Connect external devices to the TV regardless about the order of the TV port.

••If you connect a gaming device to the TV, use the cable supplied with the gaming device.

••Refer to the external equipment’s manual for operating instructions.

••In PC mode, there may be noise associated with the resolution, vertical pattern, contrast, or brightness. If noise is present, change the PC output to another resolution, change the refresh rate to another rate, or adjust the brightness and contrast on the PICTURE menu until the picture is clear.

••Depending upon the graphics card, some resolution settings may not allow the image to be positioned on the screen properly.

Connecting to an Antenna or Cable

Connect an antenna, cable, or cable box to watch TV. The illustrations may differ from the actual items and an RF cable is optional.

CAUTION

••Make sure not to bend the copper wire of the RF cable.

Copper wire

••Complete all connections between devices, and then connect the power cord to the power outlet to prevent damage to your TV.

NOTE

••Use a signal splitter to use 2 TVs or more.

••DTV Audio Supported Codec: MPEG, Dolby Digital.

••Direct ULTRA HD broadcast is unavailable in areas without an ULTRA HD signal.

••This TV cannot receive ULTRA HD (3840 x 2160 pixels) broadcasts directly because the related standards have not been confirmed. (Depending upon model)

Other Connections

Connect your TV to external devices. For the best picture and audio quality, connect the external device and the TV with the HDMI cable. Depending upon the model, a cable may not be provided.

NOTE

•• j j j Picture j

HDMI ULTRA HD Deep Color:

-- On: Support 4K @ 60 Hz (4:4:4, 4:2:2, 4:2:0)

-- Off: Support 4K @ 60 Hz (4:2:0)

••If the device connected to Input Port also supports ULTRA HD Deep Color, your picture may be clearer. However, if the device doesn’t support it, it may not work properly. In that case, connect the device to a different HDMI port or change the TV’s HDMI ULTRA HD Deep Color setting to Off.

-- This feature is available only on certain models which support HDMI ULTRA HD Deep Color.

12