LG Electronics 50PX9*** Open the Cable Management Clip as, Fit the Cable Management Clip as shown

PREPARATION

PREPARATION

STAND INSTALLATION

■Image shown may differ from your TV.

When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully, the product can tilt forward after the product installation.) If you tighten the bolt with excessive force, the bolt can deviate from abrasion of the tightening part of the bolt.

1	Carefully place the TV screen side down
	on a cushioned surface to protect the

screen from damage.

BACK COVER FOR WIRE ARRANGEMENT

■Image shown may differ from your TV.

1Connect the cables as necessary.

To connect additional equipment, see the External Equipment Setup section.

2	Assemble the parts of the Stand Body with
	the Stand Base of the TV.

Stand Body

Stand Base

2 Open the Cable Management Clip as

shown.

3 Assemble the TV as shown.

Cable Management Clip

3 Fit the Cable Management Clip as shown.

4	Fix the 4 bolts securely using the holes in
	the back of the TV.

5	Assemble the parts of the Stand Rear
	Cover with the TV. (Only 32/42/47LD7***,
	32/37/42LD8***)

Stand Rear

Cover

A-20

NOTE

►Do not use the Cable Management Clip to lift the TV.

-If the TV is dropped, you may be injured or the TV may be damaged.

Downloaded From TV-Manual.com Manuals