LG Electronics 50PK9***, 50PX9***, 50PK5**, 50PK7*** Connecting with a Euro Scart Cable, AV1

CONNECTING WITH A EURO SCART CABLE

1	Connect the Euro scart socket of the external
	equipment (DVD, VCR, etc.) to the AV1 Euro
	scart socket on the TV.
2	Turn on the external equipment.
	(Refer to the external equipment's manual for
	operating instructions.)
3	Select AV1 input source using the INPUT but-
	ton on the remote control.	1

Scart		Input		Output
	Video	Audio	RGB	Video, Audio
AV1	O	O	O	Analogue TV, Digital TV

EXTERNAL EQUIPMENT SETUP

Output Type	AV1	AV1
Current	(TV Out)	(When DTV scheduled recording is in
		progress using recording equipment.)
input mode
Digital TV	Digital TV	O
Analogue TV, AV	Analogue TV	O
Component/RGB	Analogue TV	(The input mode is converted to DTV.)
HDMI	X	X

NOTE

►TV Out : Outputs Analogue TV or Digital TV signals.

►Any Euro scart cable used must be signal shielded.

►When watching digital TV in 3D imaging mode, monitor out signals cannot be output through the SCART cable. (Only 42/47LX6***, 47/55LX9***, 50/60PX9***)

►If you set the 3D mode to On while a scheduled recording is performed on digital TV, monitor out signals cannot be output through the SCART cable, and the recording cannot be performed. (Only 42/47LX6***, 47/55LX9***, 50/60PX9***)

5

Downloaded From TV-Manual.com Manuals