16
ENG
ENGLISH
ASSEMBLING AND PREPARING
Lifting and moving the TV
When moving or lifting the TV, read the following to
prevent the TV from being scratched or damaged
and for safe transportation regardless of its type
and size.
Setting up the TV
yImage shown may differ from your TV.
Put your TV on a pedestal stand and mount the TV
on a table or wall.

Attaching the stand

2 Assemble the parts of the Stand Body with the
Stand Base of the TV.
Make sure to assemble the front and rear side
of the stand.
3 Secure the TV and the stand with the 4 screws.
Rear
Front
yIt is recommended to move the TV in the box
or packing material that the TV originally came
in.
yBefore moving or lifting the TV, disconnect the
power cord and all cables.
yWhen holding the TV, the screen should face
away from you to prevent the screen from
scratches.
yHold the top and bottom of the TV frame firmly.
Make sure not to hold the transparent part,
speaker, or speaker grill area.
yWhen transporting a large TV, there should be
at least 2 people.
yWhen transporting the TV by hand, hold the
TV as shown in the following illustration.
yWhen transporting the TV, do not expose the
TV to jolts or excessive vibration.
yWhen transporting the TV, keep the TV
upright, never turn the TV on its side or tilt
towards the left or right.
yAvoid touching the screen at all times, as
this may result in damage on the screen
or some of the pixels used to create
images.
CAUTION
1 Lay the TV with the screen side down on a flat
surface.
yLay a foam mat or soft protective cloth
on the surface to protect the screen from
damage.
CAUTION
yTighten the screws firmly to prevent
the TV from tilting forward. Do not over
tighten.
CAUTION
Stand Body
Stand Base
(Only 42PT25**, 60PV25**, 42/50PT35**,
50PV35**, 50/60PZ25**, 42/50PW45**,
50/60PZ55**, 42/50PT45**)
Downloaded From TV-Manual.com Manuals