Magic Remote Control Functions 29
Magic Remote Control Functions
When the message Magic remote control battery is low. Change the battery.is displayed, replace the battery. To install batteries, open the battery cover, replace batteries (1.5 V AA) matching 
and 
ends to the label inside the compartment, and close the battery cover. Failure to match the correct polarities of the battery may cause the battery to burst or leak, resulting in fire, personal injury, or ambient pollution. Be sure to point the remote control at the remote control sensor on the TV. To remove the batteries, perform the installation actions in reverse.
CAUTION
yyDo not mix old and new batteries, as this may damage the remote control.
This remote uses infrared light. When in use, it should be pointed in the direction of the TV’s remote sensor.
Wheel (OK) Selects menus or options and
confirms your input. Scrolls through the saved channels.
If you press the navigation button while moving the pointer on the screen, the pointer disappears, and the Magic remote control works as a regular remote control.
To display the pointer again, shake the Magic remote control from side to side.
BACK Returns to the previous level.
Pointer (RF transmitter)
BACK | SMART |
(POWER)
Turns the TV on or off.
Navigation buttons (up/down/left/right)
Scrolls through menus or options.
SMART
Accesses the Smart Home menu.
ENGLISH
Voice recognition 
1.Press the Voice recognition button.
2.Speak slowly and precisely.
When a voice is recognized, the processing message appears on the screen.
•Use the magic remote control no further than 10 cm (4 inches) from
your face.
/Q.MENU
VOL 
CH 
/Q.MENU
Accesses the Universal Control. (Depending on country) Accesses the quick menu.
VOL 
Adjusts the volume level.
CH 
Scrolls through the saved channels.
(MUTE) Mutes all sounds.
Used for viewing 3D video.
