3.3. LAN Inspection
3.3.1. Equipment & Condition
▪ Each other connection to LAN Port of IP Hub and Jig
3.3.2. LAN inspection solution
▪LAN Port connection with PCB
▪Network setting at MENU Mode of TV
▪Setting automatic IP
▪Setting state confirmation
→If automatic setting is finished, you confirm IP and MAC Address.
3.3.3. WIDEVINE key Inspection
- Confirm key input data at the "IN START" MENU Mode.
3.3.4. DTCP Inspection
-Confirm Key input at the “IN START” MENU Mode
-Below DTCP check on “IN START” MENU is enabled only for Models which “DTCP key” tool option is “ON”
-Only EU suffix models DTCP key option is on. (ex.
3.4. LAN PORT INSPECTION(PING TEST)
Connect SET → LAN port == PC → LAN Port
SET 
PC
3.4.1. Equipment setting
(1)Play the LAN Port Test PROGRAM.
(2)Input IP set up for an inspection to Test Program. *IP Number : 12.12.2.2
3.4.2. LAN PORT inspection(PING TEST)
(1)Play the LAN Port Test Program.
(2)Connect each other LAN Port Jack.
(3)Play Test (F9) button and confirm OK Message.
(4)Remove LAN cable.
Copyright © | LG Electronics. Inc. All rights reserved. | - 14 - | LGE Internal Use Only |
Only for training and service purposes |
|
| |
