LG Electronics 55LA970V/W/9-ZA Local Dimming Function Check, Magic Motion Remote control test

4.2.8. EDGE LED White balance table										4.3. Local Dimming Function Check
(1) EDGE LED module change color coordinate because of										Step 1) Turn on TV.
	aging time.									Step 2) Press “TILT” key on the Adj. R/C
(2) Apply under the color coordinate table, for compensated										Step 3) At the Local Dimming mode, module Edge Backlight
	aging time.									moving left to right. Back light of IOP module moving
(3) Normal line(Edge, Direct)										Step 4) confirm the Local Dimming mode.
	- Gumi (Mar ~ Dec) & Global									Step 5) Press “exit” key.
		Aging time		Cool		Medium		Warm
NC4.0			X		y	x	y	x	y
		(Min)
			271		270	285	293	313	329
1		0-2	281		287	295	310	320	342
2		3-5	280		285	294	308	319	340
3		6-9	278		284	292	307	317	339
4		10-19	276		281	290	304	315	336
5		20-35	275		277	289	300	314	332
6		36-49	274		274	288	297	313	329
7		50-79	273		272	287	295	312	327
8		80-119	272		271	286	294	311	326
9		Over 120	271		270	285	293	310	325
(4) Aging Chamber										4.4. Magic Motion Remote control test
				Cool		Medium		Warm
		Aging time								(1) Equipment : RF Remote control for test, IR-KEY-Code
NC4.0			X		y	x	y	x	y
		(Min)								Remote control for test
			271		270	285	293	313	329
										(2) You must confirm the battery power of RF-Remote control
1		0-5	280		285	294	308	319	340
										before test(recommend that change the battery per every lot)
2		6-10	276		280	290	303	315	335
										(3) Sequence (test)
3		11-20	272		275	286	298	311	330
										1) if you select the "Start(Mute)" key on the Adjustment
4		21-30	269		272	283	295	308	327
										remote control, you can pairing with the TV SET.
5		31-40	267		268	281	291	306	323
										2) You can check the cursor on the TV Screen, when select
6		41-50	266		265	280	288	305	320
										the "OK" key on the Adjustment remote control.
7		51-80	265		263	279	286	304	318
										3) You must remove the pairing with the TV Set by select
8		81-119	264		261	278	284	303	316
										"OK" key + "Mute" key on the Adjustment remote control
9		Over 120	264		260	278	283	303	315
										for 5 seconds.
(5) Gumi winter table(Jan, Fab) - Gumi producing model use only
										4.5. 3D function test
	(Normal line)
		Aging time		Cool		Medium		Warm		(Pattern Generator MSHG-600, MSPG-6100[Support HDMI1.4])
NC4.0			X		y	x	y	x	y	* HDMI mode NO. 872 , pattern No.83
		(Min)
			271		270	285	293	313	329
1		0-2	283		292	297	315	322	347
2		3-5	282		290	296	313	321	345
3		6-9	280		288	294	311	319	343
4		10-19	277		284	291	307	316	339
5		20-35	275		279	289	302	314	334	(1) Please input 3D test pattern like below.
6		36-49	274		275	288	298	313	330
7		50-79	273		272	287	295	312	327
8		80-119	272		271	286	294	311	326
9		Over 120	271		270	285	293	310	325
	(aging chamber)
		Aging time		Cool		Medium		Warm
NC4.0			X		y	x	y	x	y
		(Min)
			271		270	285	293	313	329
1		0-5	280		285	294	308	319	340	(2) When 3D OSD appear automatically, then select OK key.
2		6-10	276		280	290	303	315	335
3		11-20	272		275	286	298	311	330
4		21-30	269		272	283	295	308	327
5		31-40	267		268	281	291	306	323
6		41-50	266		265	280	288	305	320
7		51-80	265		263	279	286	304	318
8		81-119	264		261	278	284	303	316	(3) Don't wear a 3D Glasses, check the picture like below.
9		Over 120	264		260	278	283	303	315

Copyright ©	LG Electronics. Inc. All rights reserved.	- 19 -	LGE Internal Use Only
Only for training and service purposes