REMOTE CONTROL FUNCTIONS
Room temperature | Time of day |
|
|
| |
Set temperature | Low |
|
| Battery |
|
Day of week | Indicator |
|
|
| |
Remote display |
|
|
Up direction |
|
|
button |
|
|
Enter button |
|
|
Left direction button |
|
|
| Right |
|
Flame/Heat ON/OFF | direction |
|
button |
| |
button |
| |
Down |
| |
|
| |
| direction | Batteries |
| button | |
Purifire™ ON/OFF button |
| |
Sleep timer |
| |
|
| |
Occupancy | Ambient Light |
|
Sensor | Sensor |
|
FIGURE 5
FLAME/HEAT ON/OFF BUTTON 
Press the Flame/Heat On/Off button 
to turn the Flame/Heat function ON. When the heater function is ON, the 
icon is displayed on the remote control in the upper left hand corner. When this 
icon is displayed, the red indicator light is activated on the firebox. The default temperature setting is 72°F (22°C). Press the Flame/Heat On/Off button 
to turn the Flame/Heat function OFF.
NOTE
When using the remote control the heater runs on a thermostat. Press the 
or direction keys to adjust the set temperature. Once the desired set temperature is reached the heater will turn OFF. The heater will cycle ON and OFF to maintain the desired set temperature.
PURIFIRE ON/OFF BUTTON 
Press the Purifire™ On/Off button 
to turn the Purifire™ function ON. When the Purifire™ function is ON and the Heater 
icon is NOT displayed on the remote control, the green indicator light is activated on the firebox. The default setting for the Purifire™ is set at low speed. Press the Purifire™ On/Off button 
to turn the Purifire™ function OFF.
NOTE
To turn the Flame/Heat and Purifire™ ON or OFF at the same time, press both 
control buttons simultaneously.
8
