UPPER LIGHT BULB REQUIREMENTS
Quantity of 2 clear chandelier or candelabra bulbs with an
DO NOT EXCEED 25 WATTS PER BULB
To access the upper light bulb area:
1.Open the
2.Remove upper light bracket with a screwdriver.
3.Replace bulb.
4.Reassemble in the reverse order as above.
Upper Light
Screw
FIGURE 9 | Upper Light Bracket |
PURIFIRE™ FILTER
The Purifire™ filter supplied in your fireplace is reusable and washable. The filter should be cleaned or replaced on average once a year. To clean the filter gently tap filter on a hard surface to dislodge any loose dirt or debris, and then clean with water. No soap or cleaning products are recommended. The filter size is 20” X 10” X 1” rated at MERV 10. If using an after market filter follow the manufacturers recommended replacement instructions.
To replace filter:
1.Open the
2.Remove the 3 mounting screws from the air filter bracket.
3.Remove the air filter bracket assembly from the firebox.
4.Slide filter out of air filter bracket.
5.Reassemble in reverse order as above.
NOTE
If after market air filter is used ensure it is installed according to the manufacturers recommended instructions.
Air Filter
Air Filter Bracket
Mounting Screws 
FIGURE 10 | 14 |
|
