FIREPLACE INSTALLATION
1.Install the
IMPORTANT
BI-FOLD DOOR INSTALLATION
1.Remove the
2.Remove the Philips head screw and the door spacer from the bottom edge of the
3.Insert the door spacer into the bottom panel ledge mounting hole.
4.Insert the top edge of the
5.Secure the
NOTE
If short handled screwdriver is not available tilt the unit back.
6.Repeat steps
Mounting Hole
Door Spacer
Screw
Bottom Ledge
FIGURE 1
2.Install the fireplace assembly into the mantel. (refer to mantel assembly instructions)
IMPORTANT
If not using a Dimplex mantel, the fireplace must be installed in an enclosure with the following MINIMUM internal/opening dimensions.
4