SERIAL No.
XXX
XX
|
| Main |
|
| On/Off |
Initialization | Switch | |
| ||
| Button |
|
Indicator | 3 Position |
|
Light | Manual |
|
Control
FIGURE 2
RESETTING THE TEMPERATURE CUTOFF SWITCH
Should the heater overheat, an automatic switch will turn the heater off and it will not come back on without being reset. The temperature cutoff switch can be reset by unplugging the unit, waiting 5 minutes and plugging the unit back in.
CAUTION
If you need to continuously reset the heater, unplug the unit and call Dimplex North America Limited at
REMOTE CONTROL
The remote control has a range of approximately 50 ft. (15.25m), it does not have to be pointed at the fireplace and can pass through most obstacles (including walls). It is supplied with 243 independent frequencies to prevent interference with other units.
BATTERY INSTALLATION
1.Depress tab on the battery cover on the back of the remote transmitter and remove battery cover.
2.Install 3 AAA batteries into the remote control. (included)
3.Replace the battery cover.
NOTE
The remote transmitter has a battery backup time of 24 hours. The batteries can be removed for up to 24 hours before the transmitter will require
Batteries
FIGURE 3
6