LG Electronics 42PW350U Power Command k a Volume Control Command k f, Contrast Command k g

ENGLISH

104EXTERNAL CONTROL DEVICE SETUP

01. Power (Command: k a)			06. Volume Control (Command: k f)
	To control Power On/Off of the set.		To adjust volume.
			You can also adjust volume with the volume buttons
	Transmission [k][a][ ][Set ID][ ][Data][Cr]
			on remote control.
	Data 00: Power Off	Data 01: Power On
				Transmission [k][f][ ][Set ID][ ][Data][Cr]
	Acknowledgement [a][ ][Set ID][ ][OK/NG][Data][x]
				Data Min: 00 ~ Max: 64 (*transmit by	Hexadecimal
* In a like manner, if other functions transmit ‘FF’
			code)
	data based on this format, Acknowledgement data
			*Refer to “Real data mapping”.
	feedback presents status about each function.
				Acknowledgement [f][ ][Set ID][ ][OK/NG][Data][x]
* Note: In this model, set will send the Acknowledge
	after power on processing completion.
	There might be a time delay between command and		07. Contrast (Command: k g)
	acknowledge.		To adjust screen contrast.
			You can also adjust contrast in the PICTURE menu.
02. Input Select (Command: x b)
				Transmission [k][g][ ][Set ID][ ][Data][Cr]
	To select input source for set.
			Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal
	Transmission [x][b][ ][Set ID][ ][Data][Cr]
			code)
	Data 00: DTV (Antenna)	Data 01: DTV (Cable)	*Refer to “Real data mapping”.
	Data 10: Analog (Antenna) Data 11: Analog (Cable)
				Acknowledgement [g][ ][Set ID][ ][OK/NG][Data][x]
	Data 20: AV or AV1	Data 21: AV2
	Data 40: Component or Component1		08. Brightness (Command: k h)
	Data 41: Component2
			To adjust screen brightness.
	Data 60: RGB-PC	Data 90: HDMI1
			You can also adjust brightness in the PICTURE
	Data 91: HDMI2	Data 92: HDMI3
			menu.
	Data 93: HDMI4
				Transmission [k][h][ ][Set ID][ ][Data][Cr]
	Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x]
				Data Min: 00 ~ Max: 64 (*transmit by		Hexadecimal
* Use the feature depending on your model.
			code)
03. Aspect Ratio (Command: k c)			*Refer to “Real data mapping”.
	To adjust the screen format.			Acknowledgement [h][ ][Set ID][ ][OK/NG][Data][x]
	Transmission [k][c][ ][Set ID][ ][Data][Cr]		09. Color (Command: k i)
	Data 01: 4:3	Data: 09: Just scan
			To adjust screen color.
	Data 02: 16:9	Data: 10: Cinema Zoom 1
			You can also adjust color in the PICTURE menu.
	Data 04: Zoom	…
	Data 06: Set by program	Data 1F: Cinema Zoom16		Transmission [k][i][ ][Set ID][ ][Data][Cr]
			Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal
	Acknowledgement [c][ ][Set ID][ ][OK/NG][Data][x]
			code)
04. Screen Mute (Command: k d)			*Refer to “Real data mapping”.
	To select screen mute on/off.			Acknowledgement [i][ ][Set ID][ ][OK/NG][Data][x]
	Transmission [k][d][ ][Set ID][ ][Data][Cr]		10. Tint (Command: k j)
	Data 00: Screen mute off (Picture on), Video-out
			To adjust screen tint.
	Mute off
			You can also adjust tint in the PICTURE menu.
	Data 01: Screen mute on (Picture off)
	Data 10: Video-out Mute on			Transmission [k][j][ ][Set ID][ ][Data][Cr]
			Data Red: 00 ~ Green: 64 (*transmit by Hexadecimal
	Acknowledgement [d][ ][Set ID][ ][OK/NG][Data][x]
* In case of Video-out Mute on only, TV will display On			code)
			*Refer to “Real data mapping”.
	Screen Display (OSD). But, in case of screen mute on,
	TV will not display On Screen Display (OSD).			Acknowledgement [ j ][ ][Set ID][ ][OK/NG][Data][x]
05. Volume Mute (Command: k e)			11. Sharpness (Command: k k)
	To control volume mute on/off.		To adjust screen sharpness.
	You can also adjust mute using the MUTE button on		You can also adjust sharpness in the PICTURE menu.
	remote control.			Transmission [k][k][ ][Set ID][ ][Data][Cr]
	Transmission [k][e][ ][Set ID][ ][Data][Cr]			Data Min: 00 ~ Max: 64 (*transmit by		Hexadecimal
	Data 00: Volume mute on (Volume off)
			code)
	Data 01: Volume mute off (Volume on)		*Refer to “Real data mapping”.
	Acknowledgement [e][ ][Set ID][ ][OK/NG][Data][x]			Acknowledgement [k][ ][Set ID][ ][OK/NG][Data][x]

Downloaded From TV-Manual.com Manuals