LG Electronics 55WV70MS, 55WV70BS owner manual Setting Description Tile Mode, Pip/Pbp

CUSTOMIZING SETTINGS 47

Setting		Description
Tile Mode	Tile Mode	To use this function
		- Must be displayed with various other products.
		- Must be in a function that can be connected to RGB Cable by distributor and
		RS-232C.
		Tile mode and choose Tile alignment and set the ID of the current product to
		set location.
		* Only after pressing the SET button the adjustments made to the settings will
		be saved.
		- Tile mode : column x row ( c = 1 to 15 r = 1 to 15)
		- 15 x 15 available.
		- Configuration of an integration screen is also available as well as
		configuration of One by one Display.
	Auto Config.	Sets to adjust the screen position, clock, and phase automatically.
		The displayed image may be unstable for a few seconds while the
		configuration is in progress.
	Position	Moving the screen position horizontally and vertically.
	Size	Adjust the horizontal and vertical size of the screen taking into account the size
		of the bezel.
	Natural	The image is omitted by the distance between the screens to be naturally
		shown.
	Reset	Function to initialize and release Tile.
		All Tile setting are released when selecting Tile recall and the screen returns to
		Full screen.
PIP/PBP	Displays videos or photos stored in the USB device on a single monitor by dividing it into the main
	and sub screens.
	Option
	Mode	Sets the type of secondary screen.
		*OFF: Disables the secondary screen.
		*PIP (Picture In Picture): Displays the secondary screen in the main screen.
		*PBP (Picture By Picture): Displays the secondary screen next to the main
		screen.
	Position	Adjusts the position of the sub screen (top left, bottom left, top right, bottom
		right)
		The default value is the bottom right.
	Size	Adjusts the size of the sub screen (Size 0 to 10).
		The default size of PIP (Size: 0) is 480x240; the maximum size 10 is 960x540.

NOTE

yyThe Position and Size options are enabled only in PIP mode.

ENGLISH