15. Installation
3) Installation on the floor
Installation of Mount Bracket.
• Select and mark the position for Mount Brackets and the piping hole.
•Drill the hole for the anchor nut on the wall.
•Drill the piping hole using a ø 70
•Secure the Mount Brackets on the wall with four M4 screws.
Install the indoor unit onto the Mount Brackets.
•Engage the slot at the back of the unit with Mount Bracket.
•Drill the piping hole with 70mm dia, hole core drill.
•Piping hole should be slightly slant to the outdoor side.
From the left wall |
|
more than 760mm |
|
| From the |
| right wall |
| more than 840mm |
Slot | 448mm |
Floor mount | |
bracket | |
Wall |
|
Indoor | Outdoor |
| 5~7mm |
After Installing, reassemble detached parts.
•Hang the 'Inlet Grille' and hook the 'Inlet Hanger' to the Hanger Screw.
•Assemble the 'Side Plates(R,L)' with 2 screws on both left and right side.
Slot |
Wall |
Floor mount |
bracket |
Install plate |
Piping hole
