01. Power (Command 2 : a)
GTo control Power On/Off of the set. Transmission
[k][a][ ][Set ID][ | ][Data][Cr] |
Data 0 : Power Off | 1 : Power On |
Ack |
|
|
|
[a][ ][Set ID][ ][OK][Data][x] | |
G To show Power On/Off. | |
Transmission |
|
|
|
[k][a][ ][Set ID][ | ][FF][Cr] |
|
|
Ack
[a][ ][Set ID][ ][OK][Data][x]
*In like manner, if other functions transmit ‘0xFF’ data based on this format, Acknowledgement data feed back presents status about each function.
02. Input Select (Command 2 : b)
GTo select input source for the set.
You can also select an input source using the INPUT button on the set's remote control.
Transmission
[k][b][ | ][Set ID][ | ][Data][Cr] |
|
|
Data 0 | : DTV | 5 | : Component | |
1 | : Analogue | 6 | : | |
2 | : AV1 | 7 | : HDMI1 | |
3 | : AV2 | 8 | : HDMI2 | |
4 | : AV3 | 9 | : HDMI3 | |
Ack
[b][ ][Set ID][ ][OK][Data][x]
03. Aspect Ratio (Command 2 : c) (Main Picture Size)
G To adjust the screen format. (Main picture format) You can also adjust the screen format using the ARC (Aspect Ratio Control) button on remote control or in the SCREEN menu.
Transmission
[k][c][ | ][Set ID][ ][Data][Cr] |
|
|
Data 1 | : Normal screen (4:3) | 5 | : Zoom2 |
2 | : Wide screen (16:9) | 6 | : Original |
3 | : Horizon (Spectacle) | 7 | : 14:9 |
4 | : Zoom1 | 8 | : Full |
Ack
[c][ ][Set ID][ ][OK][Data][x]
*Using the PC input, you select either 16:9 or 4:3 screen aspect ratio.
04. Screen Mute (Command 2 : d)
G To select screen mute on/off.
Transmission
[k][d][ ][Set ID][ ][Data][Cr]
Data 0 : Screen mute off (Picture on) 1 : Screen mute on (Picture off)
Ack
[d][ ][Set ID][ ][OK][Data][x]
05. Volume Mute (Command 2 : e)
G To control volume mute on/off.
You can also adjust mute using the MUTE button on remote control.
Transmission
[k][e][ ][Set ID][ ][Data][Cr]
Data 0 : Volume mute on (Volume off) 1 : Volume mute off (Volume on)
Ack
[e][ ][Set ID][ ][OK][Data][x]
06. Volume Control (Command 2 : f)
G To adjust volume.
You can also adjust volume with the VOLUME buttons on remote control.
Transmission
[k][f][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64
* Refer to ‘Real data mapping 1’. See page 113.
Ack
[f][ ][Set ID][ ][OK][Data][x]
07. Contrast (Command 2 : g)
GTo adjust screen contrast.
You can also adjust contrast in the PICTURE menu.
Transmission
[k][g][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64
* Refer to ‘Real data mapping 1’. See page 113.
Ack
[g][ ][Set ID][ ][OK][Data][x]
08. Brightness (Command 2 : h)
GTo adjust screen brightness.
You can also adjust brightness in the PICTURE menu.
Transmission
[k][h][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64
* Refer to ‘Real data mapping 1’. See page 113.
Ack
[h][ ][Set ID][ ][OK][Data][x]
