LG Electronics 4220, 60PG3000, 425000, 4232, 423000, 375000, 3720, 3220, 3232, 323000, 223000 112

APPENDIX

01. Power (Command: k a)

GTo control Power On/Off of the TV. Transmission

[k][a][ ][Set ID][ ][Data][Cr]

Data 00 : Power Off01 : Power On

Ack

[a][ ][Set ID][ ][OK/NG][Data][x]

G To show Power On/Off.

Transmission

[k][a][ ][Set ID][ ][FF][Cr] Ack

[a][ ][Set ID][ ][OK/NG][Data][x]

*Similarly, if other functions transmit ‘0xFF’ data based on this format, Acknowledgement data feed back pre- sents status about each function.

*OK Ack. ,Error Ack. and other message maybe display on the screen when TV is power On.

02. Aspect Ratio (Command: k c) (Main Picture Size)

G To adjust the screen format. (Main picture format)

You can also adjust the screen format using the

Aspect Ratio in the Q.MENU. or PICTURE menu.

Transmission

[k][c][ ][Set ID][ ][Data][Cr]

	Data	01	: Normal screen (4:3)	06	: Original
		02	: Wide screen (16:9)	07 : 14:9
APPENDIX		04	: Zoom1
				09	: Just Scan
		05	: Zoom2
	Ack
	[c][	][Set ID][ ][OK/NG][Data][x]

* Using the PC input, you select either 16:9 or 4:3

screen aspect ratio.

* In HDMI/Component (over 720p) mode, Just Scan is available.

* You can only select Original in UK digital teletext (MHEG-5).

03. Screen Mute (Command: k d) G To select screen mute on/off. Transmission

[k][d][ ][Set ID][ ][Data][Cr]

Data 00 : Screen mute off (Picture on) 01 : Screen mute on (Picture off)

Ack

[d][ ][Set ID][ ][OK/NG][Data][x]

04. Volume Mute (Command: k e)

G To control volume mute on/off.

You can also adjust mute using the MUTE button on remote control.

Transmission

[k][e][ ][Set ID][ ][Data][Cr]

Data 00 : Volume mute on (Volume off) 01 : Volume mute off (Volume on)

Ack

[e][ ][Set ID][ ][OK/NG][Data][x]

05. Volume Control (Command: k f)

G To adjust volume.

You can also adjust volume with the VOLUME buttons on remote control.

Transmission

[k][f][ ][Set ID][ ][Data][Cr]

Data Min : 00 ~ Max : 64

* Refer to ‘Real data mapping 1’. See page 114.

Ack

[f][ ][Set ID][ ][OK/NG][Data][x]

06. Contrast (Command: k g)

GTo adjust screen contrast.

You can also adjust contrast in the PICTURE menu.

Transmission

[k][g][ ][Set ID][ ][Data][Cr]

Data Min : 00 ~ Max : 64

* Refer to ‘Real data mapping 1’. See page 114.

Ack

[g][ ][Set ID][ ][OK/NG][Data][x]

07. Brightness (Command: k h)

GTo adjust screen brightness.

You can also adjust brightness in the PICTURE menu.

Transmission

[k][h][ ][Set ID][ ][Data][Cr]

Data Min : 00 ~ Max : 64

* Refer to ‘Real data mapping 1’. See page 114.

Ack

[h][ ][Set ID][ ][OK/NG][Data][x]

08. Colour (Command: k i)

G To adjust the screen colour.

You can also adjust colour in the PICTURE menu.

Transmission

[k][i][ ][Set ID][ ][Data][Cr]

Data Min : 00 ~ Max : 64

* Refer to ‘Real data mapping 1’. See page 114.

Ack

[i][ ][Set ID][ ][OK/NG][Data][x]

112