1. System
Remote RF Receiver TV
UART
or USB
RF
Pairing Information Transmission (Send to TV after Paired)
Static Calibration Data (Bypass only)
Remote FW ver. (Save also in Receiver)
BD_ADDR (Save also in Receiver)
Pairing Information Transmission Sequence
When it is paired, the remote sends packets(pairing success, F/W version, BD_ADDR) to the receiver.
The receiver sends the pairing success packet to TV directly.
F/W version and BD_ADDR packets are just saved on the receiver.
The receiver sends F/W version or BD_ADDR packet to TV when it is required.
Motion Data Transmission
Period : 7.5msec
Motion Data : gyro, accelerometer
Voice Data Transmission
Period : 10msec
Voice sampling : 16khz 16bit
Copyright © 2012 LG Electronics. Inc. All rights reserved.
Only for training and service purposes
LGE Internal Use Only