LG Electronics A7150 Reset settings, Gprs attach Menu, Settings Automatic, Manual, Preferred

Settings

]Automatic

If you select Automatic mode, the phone will automatically search for and select a network for you. Once you have selected “Automatic”, the phone will be set to “Automatic” even though the power is off and on.

]Manual

The phone will find the list of available networks and show you them. Then you can select the network which you want to use if this network has a roaming agreement with your home network operator. The phone let you select another network if the phone fails to access the selected network.

]Preferred

You can set a list of preferred networks and the phone attempts to register with first, before attempting to register to any other networks. This list is set from the phone’s predefined list of known networks.

GPRS attach (Menu 9.6.2)

If you select Switch on and you are in a network that supports packet data, the phone registers to the GPRS network and sending short messages will be done via GPRS. Also, starting an active packet data connection, for example, to send and receive e-mail, is quicker. If you select When Needed, the phone will use a packet data connection only if you start an application or action that needs it. The GPRS connection is closed after it is not used by any application.

nNote If there is no GPRS coverage and you have chosen Switch on, the phone will periodically try to establish a packet data connection.

Reset settings Menu 9.7

You can easily reset your phone to its default configuration. To do so, proceed, as follows.

1.Select the Reset Settings menu option.

2.Enter the 4-digit phone password.

n Note The password is preset to 0000.

109